 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. 3-BIT REGISTERED BUS TRANSCEIVER SY10E336 SY100E336 SY10E336 SY100E336 FEATURES s s s s s s s s s 25 cutoff bus output Extended 100E VEE range of -4.2V to -5.5V 50 receiver output Transmit and receive registers 1500ps max. clock to bus 1000ps max. clock to Q Internal edge slow-down capacitors on bus outputs Additional package ground pins Fully compatible with industry standard 10KH, 100K ECL levels s Internal 75K input pulldown resistors s Fully compatible with Motorola MC10E/100E336 s Available in 28-pin PLCC package DESCRIPTION The SY10/100E336 offer three bus transceivers with both transmit and receive registers and are designed for use in new, high-performance ECL systems. The bus outputs (BUS0 - BUS2) are designed to drive a 25 bus. The receive outputs (Q0 - Q2) are specified for 50. The bus outputs feature a normal logic HIGH level (VOH) and a cutoff LOW level when at a logic LOW. At cutoff, the outputs go to -2.0V and the output emitter-follower is "off", presenting a high impedance to the bus. The bus outputs have edge slow-down capacitors. The Transmit Enable pins (TEN) determine whether current data is held in the transmit register or new data is loaded from the A/B inputs. A logic LOW on both of the bus enable inputs (BUSEN), when clocked through the register, disables the bus outputs to -2.0V. The receiver section clocks bus data into the receive registers after gating with the Receive Enable (RXEN) input. All registers are clocked by rising edge of CLK1 or CLK2 (or both). Additional grounding is provided through the ground pins (GND) which should be connected to 0V. The GND pins are not electrically connected to the chip. BLOCK DIAGRAM 0 A0 B0 1 D Q 25 CUTOFF BUS0 D Q 50 Q0 PIN NAMES Pin Function Data Inputs A Data Inputs B Transmit Enable Inputs Receive Enable Input Bus Enable Inputs Clock Inputs 25 Cutoff Bus Outputs Receive Data Outputs VCC to Output 0 A1 B1 1 D Q 25 CUTOFF BUS1 D Q 50 Q1 A0-A2 B0-B2 TEN1, 2 RXEN BUS2 0 A2 B2 TEN1 TEN2 RXEN BUSEN1 BUSEN2 CLK1 CLK2 1 D Q 25 CUTOFF D 50 BUSEN1, 2 CLK1, 2 BUS0-BUS2 Q0-Q2 Q Q2 D Q VCCO M9999-032206 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 Issue Date: March 2006 Micrel, Inc. SY10E336 SY100E336 PACKAGE/ORDERING INFORMATION Ordering Information(1) TEN2 TEN1 VCCO Part Number SY10E336JC 18 17 Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10E336JC SY10E336JC SY100E336JC SY100E336JC SY10E336JZ with Pb-Free bar-line indicator SY10E336JZ with Pb-Free bar-line indicator SY100E336JZ with Pb-Free bar-line indicator SY100E336JZ with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Matte-Sn Matte-Sn Matte-Sn Matte-Sn B2 A2 NC 25 24 23 22 21 20 19 BUSEN1 BUSEN2 RXEN VEE CLK1 CLK2 A0 Q2 26 27 28 1 2 3 4 5 6 7 8 9 10 11 GND BUS2 VCC Q1 VCCO BUS1 GND SY10E336JCTR(2) SY100E336JC SY100E336JCTR(2) SY10E336JZ(3) SY10E336JZTR(2, 3) SY100E336JZ(3) SY100E336JZTR(2, 3) Notes: TOP VIEW PLCC J28-1 16 15 14 13 12 B1 VCCO 28-Pin PLCC (J28-1) BUS0 GND Q0 B0 A1 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10E336 SY100E336 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol VCUT IIH Parameter Cut-off Output Voltage Input HIGH Current RXEN All Other Inputs Power Supply Current 10E 100E Note: 1. Measured with VTT = -2.10V. TA = +25C TA = +85C Max. -2.03 225 150 mA -- 150 173 Unit V A Condition 1 -- Min. Typ. Max. Min. Typ. -2.10 -- -- -- -- -- -- -- 125 125 -2.03 -2.10 225 150 150 150 -- -- -- -- -- -- -- 125 125 Max. Min. Typ. -2.03 -2.10 225 150 150 150 -- -- -- -- -- -- -- 125 144 IEE AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol tPD Parameter Propagation Delay to Output CLK to Q CLK to BUS Set-up Time BUS, RXEN BUSEN A, B Data TEN Hold Time BUS, RXEN BUSEN A, B Data TEN Minimum Pulse Width, CLK Rise/Fall Time 20% to 80% (Qn) 20% to 80% (BUSn Rise) 20% to 80% (BUSn Fall) TA = +25C TA = +85C Max. 1000 1800 ps 150 100 300 450 450 500 350 200 400 300 500 300 -150 -200 -50 150 150 200 50 -150 -- 450 800 500 -- -- -- -- -- -- -- -- -- 700 1000 800 150 100 300 450 450 500 350 200 400 300 500 300 -150 -200 -50 150 150 200 50 -150 -- 450 800 500 -- -- -- -- -- -- -- -- -- 700 1000 800 150 100 300 450 450 500 350 200 400 300 500 300 -150 -200 -50 150 150 200 50 -150 -- 450 800 500 -- -- -- -- ps -- -- -- -- -- 700 1000 800 ps ps -- -- -- -- Unit ps 500 825 700 1000 1250 1800 500 825 700 1250 1000 1800 500 825 700 1250 Condition -- Min. Typ. Max. Min. Typ. Max. Min. Typ. tS tH tPW tr tf M9999-032206 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10E336 SY100E336 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY100E336JZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |